HIGH SPEED TUBE MILL

9
14
13
12
10
8
7
6
5
4
3
2
1
15
9
14
13
12
10
8
7
6
5
4
3
2
1
15
previous arrow
next arrow
MATERIAL HR/CR/GP/SS/GI/Patra/ERW/ MS
MIN & MAX PIPE NB FOR ASTM, BS, IN ANY INTERNATIONAL STD. GRADE 9MM TO 20 INCH
MIN & MAX THICKNESS 0.3MM - 1MM
MIN & MAX PIPE OD FOR PRECISION TUBE 9MM - 76MM
MIN & MAX THICKNESS 0.3MM - 1.5MM
SPEED OF MACHINE 10-120 MPM (Varies according to the Pipe OD and selection of the equipment)
HOLLOW SECTION SQUARE 10MM - 325MM
HOLLOW SECTION RECTANGULAR 25/15MM - 400/250MM
THICKNESS 0.3MM - 10MM
TYPE OF CUTTING COLD SAW

HIGH SPEED TUBE MILL

Tube Mill consists of strip preparation, pipe forming, welding, cooling, sizing straightening, pipe cut-off, and pipe take-off. A forming motor, a sizing motor, and a power transmission are done by work gearboxes that drive the whole machine. The strip first requires leveling & straightening, which is done by passing the strip through a strip leveler, pinch rolls, and guide rolls. After this, the strip is passed through various forming rolls where the strips are converted into open seam pipe.

Then it reaches the welding unit, where the edges of the open seam tube are heated by the HF induction generator (or any other welding equipment). Immediately after heating, the pipe edges are forged (fused) in the squeezing unit, and it takes the shape of the complete tube.

The premium quality High-Speed Tube Mill for Precision Tube also Known for its 20m to 120 m/minute speed, the high-speed tube mill for precision tubes, and the latest technology Machine. The high-speed tube mill for precision tubes is highly demanded by automatic operation and low maintenance.

Tube Mill for BS, IS, and ASTM Standard consisted of strip preparation pipe forming, welding, Cooling, sizing straightening, pipe cut-off unit, and pipe take-off unit. The strip first requires leveling and straightening, which is done by passing the strip through a strip leveler, pinch rolls, and guide rolls after the strip are passed through the forming and fin sections, where the stripes are converted into open-seam pipes. After that, welding takes place & passes through the sizing section, which is converted into hollow sections & straightened by Turk’s heads. After that, cutting will take place with the latest technology.

OUR OFFICES

KHASRA NO – 134/9/2, VILLAGE-BARHANA TEHSIL-BERI, JHAJJAR HARYANA – 124107

+91-9817975382

OUR BROCHURE